ZIQIAO Car Rear View Camera Parking Camera 360° Rotation Front / Rear / Left / Right View HD Night Vision Waterproof
Features:
The camera can be used as a rear view / front view / side view. The default is a front ( original image ) camera without parking guide lines. There are white and green wires leading on the power cable of the camera. Cut off the white wire, turn on the parking guide wire. cut off the green wire to convert the image into a rearview image. Please refer to the following for the usage method:
– If you need a front / side view camera without guide ruler line, do not cut any cables.
– If you need rear view camera without aid guide ruler line, cut off the green line.
– If you need rear camera with guide ruler aid line, cut off the green and white lines.
Specifications:
Signal mode: CVBS
Image sensor: CMOS
Video format: NTSC
AGC&BLC: Automatically
Viewing angle: Diagonal 170 degrees, flat angle 140 degrees
Pixels: 728 x 480
Clarity: 500TV Lines
S / N ratio: Better than 48dB
Operating voltage: DC 12V
Waterproof level: IP68
Working temperature (Deg.C): -30 ~ +80 Deg.C
Package list
HSB012:
1 x Car rear view camera
1 x 6m video cable
1 x 1m power cable
1 x User manual
1 x 22.5mm drill
HS070:
1 x Car rear view camera
1 x 6m video cable
1 x 1m power cable
1 x User manual
1 x 18.5mm hole saw
1 x Hex key
Avoid Danger:
Rear view camera is clearly visible day and night, allowing you to park safely.
Description:
The camera can be used as a rear view / front view / side view camera. The default is a front ( original image ) camera without parking guide line. There are white and green wires leading on the power cable of the camera. Cut off the white wire, turn on the parking guide line; cut off the green wire to convert the image into a rearview image. Please refer to the following for the usage method:
– If you need a front / side view camera without parking guide line, do not cut any wires.
– If you need a rear view camera without parking guide line, cut off the green wire.
– If you need a rear view camera with parking guide line, cut off the green and white wires.
Rotate the hex key into the screw to adjust the tightness and find the right angle to tighten to prevent looseness.
Product Parameters:
Product Size
Due to manual measurement, there may be an error of 1-2mm.
Installation Method:
The installation instructions are for reference only. It is recommended that a professional installer install the camera.
1. Install the camera in the area of your car license plate light.
2. Adjust the lens of the camera to your best position.
3. Connect the video output (yellow wire) to the monitor.
4. Connect the power cable (red and black) to the power supply of the car’s reversing light, while reversing, the reversing monitoring system automatically start working, you can see the condition of the car tail clearly.
Common problems and solutions ( Please answer your questions ):
(1) Can this camera install a mirror recorder on rearview?
No, he can’t, he can usually connect a TFT monitor, a mirror monitor, RCA DVD, but he can’t support any 5pin the driver’s recorder, for example, a mirror DVR.
(2) Front / side camera or rear view?
The camera can be rear view / front view / side view. Please buy it according to options.
(3) Why did the image shake, splash the screen, noise, unstable, black and white when you reverse?
1) The image becomes black and white just because you are buying the wrong TV system. This camera is built into the NTSC system by default, If your monitor is a PAL system, it will be shown by Jitter, Black and White.
Decision:
A. Please configure your GPS TV system as automatic firstly when using it, then see if it can still install the system. Since the market has many monitors with 2 systems, it can install. But some old gps can not install. Therefore, please select the Right System to match the Cameras.
B. Please check the correct cable connection setting.
C. If the above solutions still cannot deal, please contact your local car technician for help.
2) Image jitter, unstable startup screen,
Voltage Below than we offer.
Decision:
Different place and use the situation will take place; some output of the car is different. Car reversing does not work on DC .It will add a pulse signal to alarm, so it will be unstable. Therefore, we suggest that you check the voltage, whether it is 12V, or please add a delay in use.
(4) Our car has video and power cable, can you use it when I buy this camera?
Yes, he can, he supports the RCA plug. But we advise you not to use the cable youself, because the line may be aging and defined differently.
4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- We proudly offer a full satisfaction guarantee. Our highest priority is to make you happy, so every order comes with a 60-day money back guarantee!
- 100% Safety & Security Guaranteed. At automotoaccessories.com, we take your security and privacy very seriously. Shop safely using the world’s most popular and trustworthy payment methods!
BUY WITH CONFIDENCE
We truly believe in the best customer support, meaning we will do whatever it takes to make sure you have a positive purchase experience. We respond to emails within 24 hours and always make sure all your concerns are answered ASAP.
- Easy Returns. All our products are backed with 60-day money back guarantee. Just contact us and we will refund the purchase price.
- Risk-Free Purchase: Our Buyer Protection covers your purchase from click to delivery so you can shop with peace of mind.
- 100% Satisfaction Guarantee: All our products are backed with 60-day money back guarantee. If for any reason you’re not completely satisfied with your purchase, contact us for a product refund. We’ll be more than happy to assist you.
